Using a unique patented orbital cutting motion and two forward facing blades, the AS160 is able to perform with degrees of effectiveness and safety, which were previously impossible.

This award winning cuttting action which combines a hammering and cutting motion offers the advantages of safety, low dust, deep square and dry cutting.

Designed for the professional, the AS160 cuts materials ranging from bricks, mortar, wood and tree roots in the ground!

• Cuts Fast - Save time on chiselling, cleaning and rendering by cutting square to full depth of cut. The AS160 cuts faster than any existing reciprocating saw and as fast as most small angle grinders.
• Visibilty - The unique blade position allows clear visibility of the material while cutting.
• Cuts Square - The AS160 is able to cut square corners, requiring no over cutting.
• Plunge Cuts - Use the AS160 to cut directly into flush walls without stitch drilling.
• Cuts Safe - Unlike disc cutters the AS160 does not throw dust into the air, or kick back.
• Cuts Dry - Cuts masonry materials dry, with significantly less respirable dust than disc cutters.
• Cuts Deep - The AS160 is the only small, handheld saw able to cut to depths of 120mm (Plunge Blade) in masonry materials.

The AS160 cuts more:

Building Material:

• Bricks (up to 50MPa)
• Mortar
• Fibre cement
• Fast block

Rock:

• Soft sandstone
• Natural Limestone
• Soft to medium stone

Wood:

• Hard wood
• Chip or ply wood
• Dirty wood
• Tree roots in the ground

Plastics:

• Foam
• PVC
• Acrylic
• Fibreglass sheet

The AS160 is ideal for cutting mortar, brickwork and composite material in established and furnished houses. It has the ability to plunge cut to depths of 120mm, cut square corners and cut to single brick height.

Allsaw 160 Specification

Maximum cutting depth GP: 115mm (4'1/2") PB: 125mm (5")
Cutting width: 6.5mm/7.2mm (1/4"), depending on blades
Weight, with cutting blades: 4.3kg (9.5lb)
Dimensions without blades: 345mm (13 1/2") 75mm (3") 210mm (8 1/4")
Noise Level: 108 db max. at 1.0m
No load speed: 6,500rpm
Electrical rating , nominal 230 VAC, 50Hz, (UK/Europe) 900 watt 110 - 120 VAC, 50-60 Hz (UK Industrial) 1000 watt
Dust Extraction vacuum hose interface 30mm ID, EN 60335-2-69
Belt tension: 1mm (1/16") maximum mid-span deflection with 25 N (2.5kg) 8lb deflection force
Blade mount bolt torque: 14N/m (2.0 kg/m), (15ft/lb), unlubricated
CE Compliance
EN 50144-1:1999 incl. Amdt 1 & EN 50144 2-11:1997